Vacuum Pump – JKS Pump

Water Ring Vacuum Pump

luzhong — Tue, 21 May 2024 16:29:38 +0000

2BEC series water ring vacuum pump and compressor are usually used to suck gases that do not contain solid particles, insoluble in water and non corrosive, so as to form vacuum and pressure in closed containers. By changing the structural material, it can also be used to pump other corrosive liquids or use corrosive liquids as working fluids. It is widely used in papermaking, chemical industry, petrochemical industry, light industry, pharmacy, food, metallurgy, building materials, electrical appliances, coal washing, ore washing, chemical fertilizer and other industries.

Welded impeller is adopted, the blade is stamped and formed at one time, and the profile is reasonable; All wheel hubs are machined, which fundamentally solves the problem of dynamic balance. The impeller and pump shaft are hot installed, with reliable performance and stable operation. After the impeller is welded, the overall operation is well heat treated, and the blade has good blade performance, which fundamentally ensures the impact resistance and bending resistance of the blade, and can adapt to the harsh working conditions of load impact fluctuation.

2BEC series pump is equipped with air-water separator, with suction and exhaust ports at multiple positions, and the pump cover is equipped with exhaust valve maintenance window. The clearance between the impeller and the distribution board is adjusted by the gland at both ends of the positioning bearing, which is convenient for installation and use, simple operation and maintenance.

Our vacuum pumps have been strictly inspected and tested by the testing center, with superior performance, reliability and durability.

Minimum absolute suction pressure: 33hpa, 160hpa ; Extraction rate: 2.8 ~ 353m3 / min ; Motor power: 11 ~ 560kw ; Product standard: Q / fp201.1-201.3-89 (EPV din28431) ; Transmission mode: motor direct connection and motor belt transmission .

After placing the order, please contact the salesperson to provide you with the installation plan as soon as possible. Please construct the foundation according to the dimensions on the foundation drawing.

2. Before installing and using the equipment, please carefully read the product installation and operation manual. If you have any questions, please call our 24-hour service hotline at 400-8570-567 or 13506440087. We will have professional technical personnel to coordinate with you.

3. Before leaving the factory, the equipment undergoes a water and pressure test. If there is a small amount of water stored in the pump and it is installed and used in colder areas, please ensure that the storage and installation environment of the pump will not cause the water in the pump to freeze. Improper storage causing pump damage will be the responsibility of the user. Please empty the equipment and pipelines in a timely manner when not in use in winter to avoid damage caused by frost

4. Before using the pump, please ensure that the power supply voltage is stable, there is a protective device (which can be matched with a control system), the environment is dry, and the pipeline valves are installed properly. If you have any questions about installation and use, you can call our factory’s service hotline. Any damage to the pump caused by improper installation or use shall be the responsibility of the user.

6. It is recommended that you install a filtering device on the imported pipeline and regularly clean it to ensure the reliability and service life of the pump operation

Dear customer, please check if the packaging of the goods is damaged upon receipt, and if the products, manuals, certificates of conformity, accessories, etc. are complete. If there are any abnormalities, please take photos immediately and contact the customer service manager. Please make sure to sign for it in person. Any loss or damage to the goods caused by not signing for it or not inspecting the goods will be the sole responsibility of the recipient.

Roots Water Ring Vacuum Pump

luzhong — Mon, 22 Apr 2024 15:49:06 +0000

Vacuum pump unit is a kind of equipment that the manufacturer combines and configures the vacuum pump according to the customer’s on-site use requirements to meet the customer’s on-site technical requirements. It has various forms and can be flexibly configured according to the current installation conditions of customers. It is characterized by high vacuum and flexible configuration.

6. It is recommended that you install a filtering device on the imported pipeline and regularly clean it to ensure the reliability and service life of the pump operation

High Vacuum Pump

luzhong — Sun, 21 Apr 2024 16:20:58 +0000

6. It is recommended that you install a filtering device on the imported pipeline and regularly clean it to ensure the reliability and service life of the pump operation

Liquid Ring Vacuum Pump

luzhong — Sat, 20 Apr 2024 15:15:32 +0000

2BV series water ring vacuum pump is suitable for pumping out gas and water vapor. The suction pressure can reach 33mbar absolute pressure (97% vacuum degree). When the water ring vacuum pump works for a long time when the suction pressure is close to the limit vacuum (saturated steam pressure of working fluid), the cavitation protection pipe shall be connected to protect the pump. When used as a compressor, the maximum pressure is 0.26mpa (absolute pressure). 2BV series water ring vacuum pump is a new generation of energy-saving products. With excellent performance and many advantages, it will comprehensively replace SK and 2SK series water ring vacuum pumps and W, WY and WL series reciprocating vacuum pumps.

2BV2 and 2bv6 series water ring vacuum pumps / compressors are mainly used to extract explosive gases and work in various flammable and explosive environments. Their performance parameters are the same as 2bv2 and 2bv5 series.

2BV series stainless steel vacuum pump can be used in various occasions with high corrosion resistance requirements and high cleanliness requirements.

According to the working condition, all flow passage components of 2BV series stainless steel vacuum pump: impeller, disc, pump cover and pump body can be selected

SUS304（0Cr18Ni9)

SUS316（0Cr17Ni12Mo2）

SUS316L（00Cr17Ni14Mo2）

And other stainless steel materials, pump shaft material: 2Cr13, SUS304 or SUS316L

The mechanical seal adopts imported products, and the seal can be fluororubber or polytetrafluoroethylene

Main features:

· direct connection design of motor, saving space, easy installation and maintenance.

All imported mechanical seals are used as standard configuration.

· all are equipped with cavitation protection pipe interfaces. If working under the limit pressure, opening the cavitation protection pipe interface (or connecting with the separator) can eliminate the cavitation sound and protect the pump under the condition of ensuring the suction effect to the greatest extent.

All 2BV series are equipped with stainless steel impellers as standard, and all 2bv2 series are equipped with stainless steel discs / impellers. High strength, durable, and improve the corrosion resistance of the pump. If all flow passage parts are made of stainless steel, they can work in a more harsh environment.

the unique flexible exhaust port design will not produce over compression, ensuring the best efficiency of 2BV within its performance range.

6. It is recommended that you install a filtering device on the imported pipeline and regularly clean it to ensure the reliability and service life of the pump operation

Water Ring Low Temperature Vacuum Pump

luzhong — Thu, 20 Apr 2023 13:04:42 +0000

SZ series water ring vacuum pump and compressor are used to pump or compress air and other non corrosive, insoluble in water and non solid particles, so as to form vacuum and pressure in closed containers. A small amount of liquid is allowed to be mixed in the inhaled gas. It is widely used in machinery, petrochemical, pharmaceutical, food, sugar industry and electronic fields.

Because the gas compression is isothermal in the working process, it is not easy to be dangerous when compressing and pumping flammable and explosive gases, so it is more widely used. The working vacuum range is -0.03 ~ -0.08mpa.

6. It is recommended that you install a filtering device on the imported pipeline and regularly clean it to ensure the reliability and service life of the pump operation

Corrosion Resistant Water Ring Vacuum Pump

luzhong — Sun, 26 Mar 2023 15:29:55 +0000

6. It is recommended that you install a filtering device on the imported pipeline and regularly clean it to ensure the reliability and service life of the pump operation

Centrifugal Vacuum Pump

luzhong — Mon, 20 Mar 2023 13:00:40 +0000

SK water ring vacuum pump and compressor are used to pump or press gas and other non corrosive, insoluble in water and free of solid particles, so as to form vacuum or pressure in closed containers and meet the requirements of process flow. A small amount of liquid is allowed to be mixed in the inhaled or pressurized gas.

SK water ring vacuum pump and compressor are widely used in machinery, petroleum, chemical industry, pharmacy, ceramics, sugar making, printing and dyeing, metallurgy, electronics and other industries.

In the working process, the gas compression of this kind of pump is carried out under isothermal state, so it is not easy to cause danger when pressing or pumping flammable and explosive gas, so it is more widely used in it.

6. It is recommended that you install a filtering device on the imported pipeline and regularly clean it to ensure the reliability and service life of the pump operation